Brief Introduction

CDQSB12-15D

SMC's cylinder CDQSB12-15D Key ParametersType: Compact (thin) cylinder (single-rod, double-acting; compact design with short axial length and thin profile);Bore Diameter: 12mm (corresponding to "12" in the model; output thrust is approximately 57N at 0.5MPa, suitable for light-load scenarios);Stroke: 15mm (corresponding to "15" in the model; short stroke enables precise actuation and reduces ineffective space occupation);Built-in Magnetic Ring: Yes (can be matched with a magnetic switch to detect the extension and retraction position of the piston);Port Thread: M3×0.5 (micro interface, suitable for small-flow pneumatic pipelines);Pressure Range: Minimum 0.1MPa, maximum 1.0MPa; pressure resistance 1.5MPa;Temperature Range: -10~60℃ (non-freezing; avoid high temperatures to prevent seal aging);Piston Speed: 50-500mm/s (a micro flow control valve is required to prevent high-speed impact during short strokes);Cushioning Method: Pad cushioning (rubber pad at the end of the stroke for shock absorption, suitable for light-load and low-impact requirements);Mounting Method: "D" indicates two-sided mounting (with mounting holes on both sides of the cylinder body, allowing horizontal/vertical fixing to meet multi-directional mounting needs).ApplicationsSuitable for light-load linear actuation scenarios with extremely limited installation space, such as:Assembly of microelectronic devices (e.g., pressing components on PCB boards, positioning for plugging and unplugging micro connectors);Internal movements of precision instruments (e.g., fine adjustment of sensor probes, driving the opening and closing of small valves);Light-load clamping of automated fixtures (e.g., auxiliary fixing of small workpieces and thin-walled parts);Commonly used in consumer electronics production lines, medical micro-equipment, laboratory automation devices and other scenarios with high requirements for space and precision.